The Setup CD section is primarily for defining parameters for a CD jukebox and for the programming of playlists.  Most CD jukeboxes allow a sequence of tracks to be programmed into it that it will later playback.

This parameter should be set to the maximum number of tracks that your jukebox will support being programmed at a time.  This is typically around 30.

This is the number of slots that your jukebox has.  In the case of Pioneer, many of their players have an extra slot for quick playing of a single CD.  You would not include this extra slot in the total.

This refers to the minimum number of digits to use when programming a playlist into your jukebox.  When programming a playlist into your jukebox, some manufacturers only require the necessary digits for a disc.  In this case, set this parameter to 0.  Other manufacturers may require a minimum of 2 digits.  An example would be programming disc number 8.  Some jukeboxes may require the disc to be programmed as 0 then 8.  Set the parameter to 2 in this case.

This works the same way as Number of Digits when Programming Discs but sets the requirements for tracks instead of discs.

This field allows you to set the ID of the default macro that is to be used for telling a CD jukebox to play a particular slot and track.

This field allows you to set the ID of the default macro that is to be used for telling a CD jukebox to program a playlist into the player.