Active TopicsActive Topics  Display List of Forum MembersMemberlist  Search The ForumSearch  HelpHelp
  RegisterRegister  LoginLogin
PowerHome Programming
 PowerHome Messageboard : PowerHome Programming
Subject Topic: Sending to Device Group 2 Post ReplyPost New Topic
Author
Message << Prev Topic | Next Topic >>
edtude
Groupie
Groupie
Avatar

Joined: July 26 2006
Location: United States
Online Status: Offline
Posts: 64
Posted: December 25 2014 at 09:40 | IP Logged Quote edtude

Ok I have been fooling with this for the last few days what I have is I purchased a Fanlinc and have it installed --not real keen on the real bright LEDs adding mood lighting-- but anyway what I want to be able to do is operate the fan from Powerhome based on parameters such as temp and time of day and occupancy. The fan is operated off of Group 2 on the device and the speed of the fan is dependent on the value of the Brightness level. Has anyone else already tackled this? If not what is the format for turning on Group 2 on an individual device?
Thanks and Merry Christmas!
eds
Back to Top View edtude's Profile Search for other posts by edtude
 
dhoward
Admin Group
Admin Group
Avatar

Joined: June 29 2001
Location: United States
Online Status: Offline
Posts: 4447
Posted: December 30 2014 at 14:02 | IP Logged Quote dhoward

Ed,

To control a group 2 on a device from PowerHome, you'll need to create a link with the PowerHome PLM as the controller (whatever controller group you want) and the Fanlinc as the responder (button column set to 2).

After that, you can control the device using an Insteon group command (it will control all devices if you have more than responder in the particular PLM group) or you can send an Insteon group cleanup command which will control ONLY that device.

Dave.
Back to Top View dhoward's Profile Search for other posts by dhoward Visit dhoward's Homepage
 
edtude
Groupie
Groupie
Avatar

Joined: July 26 2006
Location: United States
Online Status: Offline
Posts: 64
Posted: December 31 2014 at 09:52 | IP Logged Quote edtude

Thanks Dave. I thought I tried that but obviously I did not do it quite right. Works simply beautiful just as you explained it!
eds
Back to Top View edtude's Profile Search for other posts by edtude
 
Anempon
Newbie
Newbie


Joined: August 19 2016
Online Status: Offline
Posts: 1
Posted: August 19 2016 at 21:46 | IP Logged Quote Anempon

edtude wrote:
Thanks Dave. I thought I tried that but
obviously I did not do it quite right. Works simply
beautiful just as you explained it!
eds


We are just the same. we both didn't do the right one.
The post really a helpful one. Thanks a lot.
Back to Top View Anempon's Profile Search for other posts by Anempon
 

If you wish to post a reply to this topic you must first login
If you are not already registered you must first register

  Post ReplyPost New Topic
Printable version Printable version

Forum Jump
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum